Differences

This shows you the differences between two versions of the page.

--- hardware_power [2019/08/15 17:00] – sspezial
+++ hardware_power [2019/08/15 18:25] (current) – sspezial
@@ Line 1: / Line 1: @@
 ====== Power ======
 ----
-**PLEASE TURN OFF ALL POWER WHEN YOU LEAVE THE ROOM.**
+**MAKE SURE ALL POWER CABLES AT //WAK// BOXES ARE PLUGGED IN THE LOWEST SOCKET.**
 ----
-Make sure all power cables at WAK boxes are plugged in the lowest socket row.
+**WAK 1 - 6** are in the lower level of the IASpace. **WAK 7 - 12** are in the middle level of the IASpace and **WAK 13 - 18** are in the upper level of the IASpace (some WAK may be behind the black curtains).
-WAK 1 - 6 are in the lower level of the IASpace. WAK 7 - 12 are in the middle level of the IASpace and WAK 13 - 18 are in the upper level of the IASpace (some WAK may be behind the black curtains).
+**In order to access the WAK page from the control page, you need to be login as Admin.** (Please refer to [[optitrack_camera_system|this page]]).
-**In order to access the WAK page from the control page, you need to be login as Admin.** (Please refer to this page).
 {{:20190815_155940.jpg?400|}}
-Turn on the computers by pressing the button with the "Alien".
+----
+===== Powering ON computers =====
+Turn on the computers by pressing the button with the **Alien**.
 {{:hardware_computerswitch.jpg?400|}}
 ----
-===== Powering the Mocap system =====
-For powring the mocap system (Optitrack cameras) make sure to turn on the WAK 13 & 15 on the control panel.
-{{:20190815_155940_copy.jpg?400|}}
-If the Optitrack cameras are green it means that the mocap system is on but need to be calibrated (refer to this page for [[motive_calibrating|calibration]]). If they are blue they are calibrated.
-{{:20190815_164041.jpg?400|}}
-===== Powering Off the Mocap system =====
-To power off the Optitrack Mocap system (Optitrack cameras) turn of the WAK 13 & 15 on the control Panel.