User Tools

Site Tools


motive_rigidbody

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
motive_rigidbody [2018/03/27 16:56] 10.129.128.117motive_rigidbody [2019/08/22 07:40] (current) nkottman
Line 1: Line 1:
-====== Create a rigid body ======+====== Setup Rigid Body ======
  
-Motive > Menu > Layout > Create 
  
-Setup a rigid body. A rigid body should +===== Marker Placement =====
  
-  * have at least 3 reflectors +Setup rigid body with markers or use one of the preconfigured ones 
-  * NOT be symetrical +A rigid body should:
-  * NOT be just one line (i.e. like the wand)+
  
-Place the rigid body on the center of the trackingspace.+  * Have at **least 3 reflectors** 
 +  * Reflectors should **not** be placed symetrical 
 +  * Reflectors should **not** be just in one line (i.e. like the wand)
  
-Select the reflectors of this body 
  
-{{:selectrigidbody.png?400|}}+===== Create Rigid Body =====
  
-{{:selectedrigidbodyreflectors.png?400|}}+{{ :selectedrigidbodyreflectors.png?300Rigid Body Markers selected}} 
 +{{:selectrigidbody.png?350| Selecting a Rigid Body}}
  
-rightClick > rigid body > create from selected marker+Place the rigid body on the center of the trackingspace so that all markers can be seen by the cameras.
  
-{{:createrigidbodies.png?400|}}+In Motive, go to ''Menu > Layout > Create''.
  
-once created, give the body a unique name and choose a streaming ID.+**Select all reflectors** of the rigid body in the perspective view and ''Right Click on the Markers > Rigid Body > Create from selected markers''.
  
-{{:rigidbodypropertiers.png?400|}}+{{:createrigidbodies.png| Create Rigid Body}}
  
-adjust some additional properties:+{{ :rigidbodypropertiers.png?300| Rigid Body Properties}}
  
-Smoothing - the higher the number, the smoother the tracking - but also creates more latency.+Once createdgive the body a **unique name** and choose a **unique Streaming ID**.
  
 +Adjust some additional properties if necessary:
 +
 +  * **Smoothing**:  The higher the number, the smoother the movements - but also creates more latency
 +  * **Max Deflection**: The maximum distance, in millimeters, that a marker may deviate from its expected position before it is not considered as a part of the rigid body. Lower values creating a more accurate solve but with a higher risk of gaps in the data. Higher deflection settings can allow for more continuous data, but with the potential for less accuracy in the rigid body tracking.
motive_rigidbody.1522162601.txt.gz · Last modified: 2018/03/27 16:56 by 10.129.128.117