immersive art space

User Tools

Site Tools

Trace:
ultragrid

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
ultragrid [2018/12/22 15:55] – [Sending HDMI Input Video (1080i50) from Decklink to Telematic Server] 10.150.0.244ultragrid [2019/03/06 14:25] (current) – mfroehli
Line 1: Line 1:
 ====== UltraGrid ====== ====== UltraGrid ======
  
 +===== Spout/Syphon =====
  
-===== Sending Spout from Windows to Telematic Server =====+==== Sending Spout from Windows to Telematic Server ====
  
-<WRAP center round box 100%> +  "C:\Program Files\UltraGrid\1.5\uv" -t spout:name=SpoutTX0:fps=25 -c libavcodec:codec=MJPEG telematic.zhdk.ch -P 10300
-"C:\Program Files\UltraGrid\1.5\uv" -t spout:name=SpoutTX0:fps=25 -c libavcodec:codec=MJPEG telematic.zhdk.ch -P 10300 +
-</WRAP>+
  
 **-t spout:name=SpoutTX0:fps=25** is capturing the spout stream with the name 'SpoutTX0'. **-t spout:name=SpoutTX0:fps=25** is capturing the spout stream with the name 'SpoutTX0'.
Line 14: Line 13:
 **telematic.zhdk.ch -P 10300** sets the address and the port to send to. **telematic.zhdk.ch -P 10300** sets the address and the port to send to.
  
-===== Sending Syphon from OSX to Telematic Server =====+==== Sending Syphon from OSX to Telematic Server ====
  
-<WRAP center round box 100%> +  ./uv -t syphon:name=Jitter:app=Max:override_fps=60 -c libavcodec:codec=MJPEG telematic.zhdk.ch -P 10300 -4
-./uv -t syphon:name=Jitter:app=Max:override_fps=60 -c libavcodec:codec=MJPEG telematic.zhdk.ch -P 10300 -4 +
-</WRAP>+
  
 **-t syphon:name=Jitter:app=Max:override_fps=25** is capturing a specific (server=jitter, app=max) syphon stream. **-t syphon:name=Jitter:app=Max:override_fps=25** is capturing a specific (server=jitter, app=max) syphon stream.
Line 28: Line 25:
 **-4** forces ultragrid to use IP4 **-4** forces ultragrid to use IP4
  
-===== Receiving Spout on Windows from Telematic Server =====+==== Receiving Spout on Windows from Telematic Server ====
  
-<WRAP center round box 100%> +  "C:\Program Files\UltraGrid\1.5\uv" -d gl:spout=SpoutRX0 -t testcard:10:10:1:uyvy telematic.zhdk.ch -P 10300
-"C:\Program Files\UltraGrid\1.5\uv" -d gl:spout=SpoutRX0 -t testcard:10:10:1:uyvy telematic.zhdk.ch -P 10300 +
-</WRAP>+
  
 **-d gl:spout=SpoutRX0** will pass the received texture to a openGL window and send it out as a Spout-Stream with the name 'SpoutRX0' **-d gl:spout=SpoutRX0** will pass the received texture to a openGL window and send it out as a Spout-Stream with the name 'SpoutRX0'
Line 40: Line 35:
 **telematic.zhdk.ch -P 10300** sets the address and the port to listen to. **telematic.zhdk.ch -P 10300** sets the address and the port to listen to.
  
-===== Receiving Syphon on OSX from Telematic Server =====+==== Receiving Syphon on OSX from Telematic Server ====
  
-<WRAP center round box 100%> +  ./uv --d gl:syphon=SyphonRX0 -t testcard:10:10:1:uyvy telematic.zhdk.ch -P 10300 -4
-./uv --d gl:syphon=SyphonRX0 -t testcard:10:10:1:uyvy telematic.zhdk.ch -P 10300 -4 +
-</WRAP>+
  
 **-d gl:syphon=SyphonRX0** will pass the received texture to a openGL window and send it out as a Syphon-Stream with the name 'SyphonRX0' **-d gl:syphon=SyphonRX0** will pass the received texture to a openGL window and send it out as a Syphon-Stream with the name 'SyphonRX0'
Line 54: Line 47:
 **-4** forces ultragrid to use IP4 **-4** forces ultragrid to use IP4
  
-===== Sending SDI Input Video (1080i50) from Decklink with embedded Audio (2 channels) to Telematic Server ===== +===== Blackmagic Decklink =====
-<WRAP center round box 100%> +
-/Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -t decklink:0:Hi50:UYVY:connection=SDI -c libavcodec:codec=MJPEG:bitrate=15MB -f A:mult:3 -f V:rs:200:250 -s embedded --audio-codec OPUS:bitrate=64000 --audio-capture-format channels=2 telematic.zhdk.ch -P 10500:10500:10501:10501 +
-</WRAP>+
  
-**-t decklink:0:Hi50:UYVY:connection=SDI** captures from the first (0) attached decklink device (i.e. BlackMagic UltraStudio Express) and the SDI input with 50 Interlaced in UYUV colorspace+==== Sending SDI Input Video (1080i50) from Decklink with embedded Audio (2 channels) to Telematic Server ==== 
 +  /Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -t decklink:0:Hi50:UYVY:connection=SDI -c libavcodec:codec=MJPEG:bitrate=15MB -f A:mult:3 -f V:rs:200:250 -s embedded --audio-codec OPUS:bitrate=64000 --audio-capture-format channels=2 telematic.zhdk.ch -P 10500:10500:10501:10501 
 + 
 +**-t decklink:0:Hi50:UYVY:connection=SDI** captures from the first (id 0) attached decklink device (i.e. BlackMagic UltraStudio Express) and the SDI input with 50 Interlaced in UYUV colorspace
  
 **-c libavcodec:codec=MJPEG:bitrate=15MB** is compressing the stream with MJPEG limited to a bitrate of 15Mbps **-c libavcodec:codec=MJPEG:bitrate=15MB** is compressing the stream with MJPEG limited to a bitrate of 15Mbps
Line 72: Line 65:
  
  
 +==== Sending HDMI Input Video (1080i50) from Decklink to Telematic Server ====
 +  /Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -t decklink:1:Hi50:UYVY:connection=HDMI -c libavcodec:codec=MJPEG:bitrate=15MB -f V:rs:200:250 telematic.zhdk.ch -P 10510
  
-===== Sending Testsignal Video (1080i50) & Audio (2 channels) to Telematic Server ===== +**-t decklink:1:Hi50:UYVY:connection=HDMI** captures from the second (id 1) attached decklink device (i.e. BlackMagic UltraStudio Express) and the HDMI input with 50 Interlaced in UYUV colorspace
-<WRAP center round box 100%> +
-/Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -t testcard:1920:1080:50i:UYVY -c libavcodec:codec=MJPEG :bitrate=15MB -f A:mult:3 -f V:rs:200:250 -s testcard --audio-codec OPUS:bitrate=64000 --audio-capture-format channels=2 telematic.zhdk.ch -P 10500:10500:10501:10501 +
-</WRAP> +
- +
-**-t testcard:1920:1080:50i:UYVY** sends testcard as 1080i50 (interlaced 50 fps) signal in UYUV colorspace+
  
 **-c libavcodec:codec=MJPEG:bitrate=15MB** is compressing the stream with MJPEG limited to a bitrate of 15Mbps **-c libavcodec:codec=MJPEG:bitrate=15MB** is compressing the stream with MJPEG limited to a bitrate of 15Mbps
- 
-**-f A:mult:3** adds audio redundancy 
  
 **-f V:rs:200:250** adds video redundancy **-f V:rs:200:250** adds video redundancy
  
-**-s embedded --audio-codec OPUS=64000 --audio-capture-format channels=2** captures the sound (stereo 2 channels) from the embedded audio input of the decklink with the audio-code OPUS at a bitrate of 64Kbps+**telematic.zhdk.ch -P 10510** is sending it to the telematic server to port 10510
  
-**telematic.zhdk.ch -P 10500:10500:10501:10501** is sending it to the telematic server, set the video RX:TX to ports to 10500 and the audio RX:TX ports to 10501. 
  
 +==== Receiving Video & Audio from Telematic Server and output it on Decklink with embedded Audio ====
 +  /Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -d decklink:0:Use1080pNotPsF=false -r embedded -t testcard:10:10:1:uyvy -s testcard --audio-codec OPUS:bitrate=1024  telematic.zhdk.ch -P 10505:10505:10506:10506
  
-===== Sending Testsignal Video to Telematic Server ===== +**-d decklink:0:Use1080pNotPsF=false** passes the received video stream to the decklink device (i.e. Blackmagic Ultrastudio Express) and output 25p as 25PsF (Progressive Segmented Frames)
-<WRAP center round box 100%> +
-/Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -t testcard:1920:1080:25p:UYVY -c libavcodec:codec=MJPEG:bitrate=15MB -f V:rs:200:250 telematic.zhdk.ch -P 10520 +
-</WRAP>+
  
-**-t testcard:1920:1080:25p:UYVY** sends testcard as 1080p25 (progressive 25fps) signal in UYUV colorspace+**-r embedded** includes the received audio stream in the video signal on decklink
  
-**-c libavcodec:codec=MJPEG:bitrate=15MB** is compressing the stream with MJPEG limited to a bitrate of 15Mbps+**- t testcard:10:10:1:uyvy** will send a testcard image of the size 10x10 pixel with 1fps and encoded in the colorspace uyvy to the server. this is not intended for the sender, but to keep the UDP-connection open from the telematic server.
  
-**-f V:rs:200:250** adds video redundancy+**-s testcard --audio-codec OPUS:bitrate=1024** will send a testtone the server at a very low bitrate (1024bps). this is not intended for the sender, but to keep the UDP-connection open from the telematic server.
  
-**telematic.zhdk.ch -P 10520** is sending it to the telematic server port 10520+**telematic.zhdk.ch -P 10505:10505:10506:10506** is receiving from the telematic server, the video RX:TX to port 10505 (notice: this is a UDP multi proxy stream, the receiver listens to a different port than the sender is sending), the audio RX:TX to port 10506.
  
-===== Sending HDMI Input Video (1080i50) from Decklink to Telematic Server ===== 
-<WRAP center round box 100%> 
-/Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -t decklink:1:Hi50:UYVY:connection=HDMI -c libavcodec:codec=MJPEG:bitrate=15MB -f V:rs:200:250 telematic.zhdk.ch -P 10510 
-</WRAP> 
  
-**-t decklink:1:Hi50:UYVY:connection=HDMI** captures from the second (id 1) attached decklink device (i.e. BlackMagic UltraStudio Express) and the HDMI input with 50 Interlaced in UYUV colorspace+==== Receiving Video from Telematic Server and output it on Decklink ==== 
 +  /Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -d decklink:2:Use1080pNotPsF=false -t testcard:10:10:1:uyvy telematic.zhdk.ch -P 10555 
 + 
 +**-d decklink:2:Use1080pNotPsF=false** passes the received video stream to the third (id 2) decklink device (i.e. Blackmagic Ultrastudio Express) and output 25p as 25PsF (Progressive Segmented Frames) 
 + 
 +**- t testcard:10:10:1:uyvy** will send a testcard image of the size 10x10 pixel with 1fps and encoded in the colorspace uyvy to the server. this is not intended for the sender, but to keep the UDP-connection open from the telematic server. 
 + 
 +**telematic.zhdk.ch -P 10555** is receiving from the telematic servers port 
 + 
 +===== Testsignals ===== 
 + 
 +==== Sending Testsignal Video (1080i50) & Audio (2 channels) to Telematic Server ==== 
 +  /Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -t testcard:1920:1080:50i:UYVY -c libavcodec:codec=MJPEG :bitrate=15MB -f A:mult:3 -f V:rs:200:250 -s testcard --audio-codec OPUS:bitrate=64000 --audio-capture-format channels=2 telematic.zhdk.ch -P 10500:10500:10501:10501 
 + 
 +**-t testcard:1920:1080:50i:UYVY** sends testcard as 1080i50 (interlaced 50 fps) signal in UYUV colorspace
  
 **-c libavcodec:codec=MJPEG:bitrate=15MB** is compressing the stream with MJPEG limited to a bitrate of 15Mbps **-c libavcodec:codec=MJPEG:bitrate=15MB** is compressing the stream with MJPEG limited to a bitrate of 15Mbps
 +
 +**-f A:mult:3** adds audio redundancy
  
 **-f V:rs:200:250** adds video redundancy **-f V:rs:200:250** adds video redundancy
  
-**telematic.zhdk.ch -P 10510** is sending it to the telematic server to port 10510+**-s embedded --audio-codec OPUS=64000 --audio-capture-format channels=2** captures the sound (stereo 2 channels) from the embedded audio input of the decklink with the audio-code OPUS at a bitrate of 64Kbps
  
 +**telematic.zhdk.ch -P 10500:10500:10501:10501** is sending it to the telematic server, set the video RX:TX to ports to 10500 and the audio RX:TX ports to 10501.
  
-===== Receiving Video & Audio from Telematic Server and output it on Decklink with embedded Audio ===== +==== Sending Testsignal Video to Telematic Server ==== 
-<WRAP center round box 100%> +  /Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -t testcard:1920:1080:25p:UYVY -c libavcodec:codec=MJPEG:bitrate=15MB -f V:rs:200:250 telematic.zhdk.ch -P 10520
-/Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -d decklink:0:Use1080pNotPsF=false -r embedded -t testcard:10:10:1:uyvy -s testcard --audio-codec OPUS:bitrate=1024  telematic.zhdk.ch -P 10505:10505:10506:10506 +
-</WRAP>+
  
-**-d decklink:0:Use1080pNotPsF=false** passes the received video stream to the decklink device (i.e. Blackmagic Ultrastudio Express) and output 25p as 25PsF (Progressive Segmented Frames)+**-t testcard:1920:1080:25p:UYVY** sends testcard as 1080p25 (progressive 25fps) signal in UYUV colorspace
  
-**-r embedded** includes the received audio stream in the video signal on decklink+**-c libavcodec:codec=MJPEG:bitrate=15MB** is compressing the stream with MJPEG limited to a bitrate of 15Mbps
  
-**- t testcard:10:10:1:uyvy** will send a testcard image of the size 10x10 pixel with 1fps and encoded in the colorspace uyvy to the server. this is not intended for the sender, but to keep the UDP-connection open from the telematic server.+**-f V:rs:200:250** adds video redundancy
  
-**-s testcard --audio-codec OPUS:bitrate=1024** will send a testtone the server at a very low bitrate (1024bps). this is not intended for the sender, but to keep the UDP-connection open from the telematic server.+**telematic.zhdk.ch -P 10520** is sending it to the telematic server port 10520
  
-**telematic.zhdk.ch -P 10505:10505:10506:10506** is receiving from the telematic server, the video RX:TX to port 10505 (notice: this is a UDP multi proxy stream, the receiver listens to a different port than the sender is sending), the audio RX:TX to port 10506. 
  
  
 +===== Preview =====
  
-===== Receiving Video from Telematic Server and output it on Decklink ===== +==== Preview Video & Audio from Telematic Server on Screen ==== 
-<WRAP center round box 100%> +  /Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -d gl -r coreaudio -t testcard:10:10:1:uyvy -s testcard --audio-codec OPUS:bitrate=1024  telematic.zhdk.ch -P 10505:10505:10506:10506
-/Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -d decklink:2:Use1080pNotPsF=false -t testcard:10:10:1:uyvy telematic.zhdk.ch -P 10555 +
-</WRAP>+
  
-**-d decklink:2:Use1080pNotPsF=false** passes the received video stream to the third (id 2) decklink device (i.e. Blackmagic Ultrastudio Express) and output 25p as 25PsF (Progressive Segmented Frames)+**-d gl** passes the received video to display 
 + 
 +**-r coreaudio** passes audio to system core audio component
  
 **- t testcard:10:10:1:uyvy** will send a testcard image of the size 10x10 pixel with 1fps and encoded in the colorspace uyvy to the server. this is not intended for the sender, but to keep the UDP-connection open from the telematic server. **- t testcard:10:10:1:uyvy** will send a testcard image of the size 10x10 pixel with 1fps and encoded in the colorspace uyvy to the server. this is not intended for the sender, but to keep the UDP-connection open from the telematic server.
  
-**telematic.zhdk.ch -P 10555** is receiving from the telematic servers port+**-s testcard –audio-codec OPUS:bitrate=1024** will send a testtone the server at a very low bitrate (1024bps). this is not intended for the sender, but to keep the UDP-connection open from the telematic server.
  
 +telematic.zhdk.ch -P 10505:10505:10506:10506 is receiving from the telematic server, the video RX:TX to port 10505 (notice: this is a UDP multi proxy stream, the receiver listens to a different port than the sender is sending), the audio RX:TX to port 10506.
  
-===== Preview Video from Telematic Server on Screen ===== + 
-<WRAP center round box 100%> +==== Preview Video from Telematic Server on Screen ==== 
-/Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -d gl -t testcard:10:10:1:uyvy telematic.zhdk.ch -P 10515 +  /Applications/UltraGrid\ GUI.app/Contents/MacOS/uv -d gl -t testcard:10:10:1:uyvy telematic.zhdk.ch -P 10515
-</WRAP>+
  
 **-d gl** passes the received video to display **-d gl** passes the received video to display
Line 157: Line 154:
  
 **telematic.zhdk.ch -P 10515** is receiving from the telematic servers port **telematic.zhdk.ch -P 10515** is receiving from the telematic servers port
- 
ultragrid.1545490538.txt.gz · Last modified: 2018/12/22 15:55 by 10.150.0.244